The B10 seat is stylish, lightweight, rigid and compact. It is based on our popular B6 race shape but modified to be more convenient as a daily driver. The B6 has always been a great seat for those that liked a low head position with an enveloping and ultra supportive shape, but often the race type belt holes were awkward when trying to feed a factory three point seat belt through. The B10’s cut away sides allow convenient use of the stock belts with the added benefit that getting in and out of the seat is also easier. However, we have been careful to make sure that the support of the driver is not compromised.  The front of the seat kicks up a little more than the B6, which not only aids drivers with longer legs but also helps if the seat were to be angled to a more upright position. A more upright seat allows a comfortable arm length in saloon cars, where the steering column cannot be extended, or lengthened towards the driver. The headrest height has been raised over the B6 seat so that a driver with a long torso does not run out of headrest support.

The B10 has been given a modern fresh look and although its highly technical laminate is rigid and tough, it weighs only 4.5 kg. The seat comes complete with a Dinamica® suede covered headrest pad. The optional suede covered cushion and back panels add 1 kg and are recommended when the car is intended for mainly road use. 

Write a review

Please login or register to review

B10 Carbon GRP Racing Seat

  • Brands Tillett
  • Product Code: B10-44.5C/GRP
  • Availability: Pre-Order
  • £1,058.00


Related Products

STBO (Formerly TB5) aluminium bracket set

STBO (Formerly TB5) aluminium bracket set

These economical side mount brackets are identical to the PTBO in that they also point outwards, but..

£94.00

EBP (Formerly EBF2) brackets (pair)

EBP (Formerly EBF2) brackets (pair)

The beautiful and light EBP premium brackets are designed to solidly fit the B6/B7/B8-43/B9-43 shape..

£512.00

EBS (Formerly EB4) Bracket set

EBS (Formerly EB4) Bracket set

The EBS bracket set is designed to fit the B6 Screamer/B6-43 XL Screamer/B7-40/B7-44/B8-43/B9-43(+ B..

£352.00

EBR (Formerly EB5) Bracket set for Elise/Exige

EBR (Formerly EB5) Bracket set for Elise/Exige

The EBR are designed to fit directly on top of the existing Elise/Exige platform runners. They have ..

£111.00

EBR17+ (Formerly EB6) Bracket set for Elise/Exige

EBR17+ (Formerly EB6) Bracket set for Elise/Exige

EBR 17+ (Formerly EB6)Designed to fit seat models B6, B6-43 XL, B7-40, B7-44, B8-43 and B9-43 + (B6 ..

£105.00

ERAIL/EB8 for all Elise/Exige platform cars

ERAIL/EB8 for all Elise/Exige platform cars

The ERAIL aluminium rail allows either the REBB5, or EBR steel Lotus brackets to bolt down on top of..

£305.00

STBI aluminium bracket set

STBI aluminium bracket set

The STBi bracket system is designed to tuck under the seat to give a minimum footprint, this aids fi..

£94.00

VTBI steel bracket set

VTBI steel bracket set

The 2° VTBi bracket set is identical to the STBi but made from 3 mm steel. This makes it more econom..

£63.00

VTBO steel bracket set

VTBO steel bracket set

The VTBO brackets can be used with the B6 Screamer, B7, B8, B9, B10 and C1 seats. They also fit the ..

£63.00